pharmacy instruments

Characteristics:

1. Microcomputer automatic control, have touch-key, complete automated operation.
2. Count speed is adjustable, high accuracy, metal shell, and elegant appearance.
3. Both round and long seeds are suitable

Technical specification:

1. Count Range: Small and middle sample: 0.7-4 mmx0.7-12mm
2. Big sample: 3-10mmx3-12 mm
3. Count Accuracy: Big and middle sample: 2/1000 small sample: 4/1000
4. Count Speed: 1000 /3min (its based on level 2, if you want fast you can turn to level 3-7)
5. Count Capacity: 1-99999
6. Power: 220V 50HZ
7. Continuous working time: 5Hr

Introduction:

Microsil Fruit Firmness Tester (also known as a Fruit Pressure Tester) is a penetrometer that measures fruit firmness and provides a quick, easy and, according to university studies, accurate method to determine fruit maturity.

General Features& Specification:

LIC-6003C: For Apples, Pears, Avocado, Kiwi, Tomatoes, etc.

Range: till 13 kg / 28 lb

Firmness, or degree of softness or crispness, is used worldwide as a test of ripeness and maturity of many fruits. The Fruit Tester can be used as either a hand-held instrument or mounted on a test and for more precise measurements.

• Rugged Construction: High impact plastic case, aluminum dial, precision steel spring, brass mechanism chassis, impact resistant plastic crystal, stainless steel plunger and accessories. Parts disassemble for easy cleaning.
• Specifications: Peak Firmness Hold button automatically freezes the highest reading until released by push button that returns the pointer to zero. Dual Graduations; reads in Pound and Gram. Accuracy: ± 2 graduations through 2500 grams; ± 1 graduation over 2500 grams(all models).
• Spare Parts Included: 8 mm (5/16) and 11mm (7/16) stainless steel plunger tips, protection (splash) plate, fruit peeler, manual, use recommendations, and carrying case. This tool is perfectly fit to detect proper picking maturity and control fruit softening during cold storage. It measures the pressure necessary to force a plunger of specified size into the pulp of fruit.
• Preparing Samples: About ten days before normal picking time, control pulp firmness, repeat control each 6-7 days for winter pome-fruits, each 2-3 days for summer pome-fruits, and stone fruits. Take samples from several plants and several spots of each plant as a random sample will be more representative of the lot. A suitable sample will be composed of 15-20 fruits; 2 measures have to be taken on each fruit at opposite sides, at the middle point of each side, after removing 1/2-3/4 diameter disc of peel.
• Hand Held Measurement: Hold the fruit firmly in the left hand hold the fruit tester between thumb and forefinger of the right hand, push button-commanded indicator hand, place the plunger again stthe fruit and press with increasing strength until the plunger tip is penetrated into the pulp up to the notch. Slow penetration of the plunger is essential. Sharp movements and sudden pressure application may impair your measurements. In order to avoid mistakes and to assure slow penetration of the plunger, make sure that the hand holding the fruit is firm, leaning it on the table, and keep the arm rigid.

Introduction:

Microsil Fruit Firmness Tester (also known as a Fruit Pressure Tester) is a penetrometer that measures fruit firmness and provides a quick, easy and, according to university studies, accurate method to determine fruit maturity.

General Features & Specification:

LIC-6003D:For Apples, Pears, Avocado, Kiwi, Tomatoes, Etc.

Range:0-20 Kg / 44 Lb

Resolution:0.2 Kg. / 0.5 Lb

Sensitivity:0,5 Kg

Firmness, or degree of softness or crispness, is used worldwide as a test of ripeness and maturity of many fruits. The Fruit Tester can be used as either a hand-held instrument or mounted on a test

and for more precise measurements.

• Rugged Construction: High impact plastic case, aluminum dial, precision steel spring, brass mechanism chassis, impact resistant plastic crystal, stainless steel plunger and accessories. Parts disassemble for easy cleaning.
• Specifications: Peak Firmness Hold button automatically freezes the highest reading until released by push button that returns the pointer to zero. Dual Graduations; reads in Pound and Gram. Accuracy:± 2 graduations through 2500 grams;± 1 graduation over 2500 grams (all models). Spare parts included:8 mm (5/16) and11 mm (7/16) stainless steel plunger tips, protection (splash) plate, fruit peeler, manual, use recommendations, and carrying case

Description:

The stand allows more accurate testing with uniform & controlled insertion of penetrometer tip into the fruit. It eliminates sideways force from non vertical penetration. Linear slides used for actual force.

Features:

• Compact & Portable
• Rigid & Manually Operated
• Electronic model available (on request)
• Improved Fruit Testing Accuracy
• Precision Measurement & Results
• Cost effective with faster operation
• Weight:5 kg approx.

Compatible With:

• Analog Type Fruit Penetrometer
• Digital Type Fruit Penetrometer

BALL MILL, MOTOR DRIVEN

(B) -do- S.S. Drum 2 Kg. capacity.

(C) -do- Aluminum Drum 1 Kg capacity.

Hand operated without gas cylinder for sealing, but supplied with gas burner (filling capacity from 10 mI. to 50 ml.)

This zone reader measures the diameter of the inhibited zone to 0.02mm. with the range of 0 to 35mm. work on 230volts A.C. 50 C/S.

The stirrer unit is completely independent and dips in the bath in one corner, fixing on its special stainless steel upright. A MS junction box is fitted to the bath frame, and carries all the electrical leads and connections, Two pilot lamps indicate functioning of the thermostat and stirrer.

Standard components are :-

Provide 50 Hz alternating current stimulus for producting minimal and super maximal seizures required in the assay anti-convulsant and epiteptic durgs complete with one pair corneal electrode 4, 6 or 8mm cups. and one pair of ear clips work on 220 A.C

Do- same as above but with clamp for fixing in stand.

Detachable polishing pan for use with Tablet Coating Pan Cat.No.2247 is made of mild steel painted and provided with inner lining of superior canvas cloth, inner dia 12"x8" high with opening of 7" dia neck used for polishing tablets..

A fairly handy instrument for taking quick readings for the hardness of tablets it is made of brass turned parts. Heavily chrome plated the scale is 0 to 20 Kg. The index mark and division is in reading. Scale is adjustable for zero setting as per size of the tablets

 I.P. standard as above with single disc. with six removable glass vessels (7.5 x 20 mm dia) have a stainless steel wire mesh bottom, which dip in water in a beaker of 1000 mI. kept on the hot plate, temperature of which is maintained 37°C with an accuracy of ±1°C.

TABLET COATING PAN : 12" DIA, STAINLESS STEEL :

Extra heavy duty for making tinctures, decoctions infusions etc. cap. 1 Lt, stainless steel disc, with screw drive, stainless steel mesh as inner perforated vessel with stop cock.

TABLET MAKING MACHINE HAND OPERATED  

Capacity 0 to 20 Kg, Dial Type, Packed in niced polished Wooden Box.